Fisher Seats - Aftermarket Husqvarna Seats $299.99

2017 - 2019 Husqvarna Seats

FC 350 • FX 450 • FE 501 • and more

We build custom aftermarket motorcycle seats for every Husqvarna model. The seat can have a new height (low or tall), width, foam density, cover, etc. Ship your seat to us to modify or purchase a new one for $100 more.

• 9" wide with stock cover @ $299.99
• 10" wide with new custom cover @ $339.99
• Wider BIG Fish options are available.
• Lowered 1/2" at no extra cost.
• Read the order form for more pricing.

* Seat shown is 10" wide

Ride snow?

You need a wide seat.

If you put a lot of miles riding on the seat, you need a custom seat. Stop punishing yourself with stock seats and seat kits.

Seat Covers can be customized with choice of vinyls, texture, & thread. Your riding style and comfort can both benefit from the right cover.

• snow specific vinyls add grip in the cold
• add custom seat cover $39.99
• grip for all riding conditions
• textures for aesthetics
• colors to match your graphics

* Seat shown is 9" wide

Additional information

Need even more information, browse our FAQ page

The majority of Husqvarna seats are OEM manufactured with a shallow foam depth. So a firm foam density is needed to keep riders from riding on the plastic seat base below. If you want more comfort from your stock seat, then the key is added width which provides more support for a better foam density. Husqvarna seats with a shallow OEM foam depth limit how low the seat can be made. Riders who sit forward over the pegs or against the gas tank may prefer the width up further, up to 6" wide over the pegs. This will make the seat feel taller and more difficult to straddle. We only do this if asked, but is a common build for supermoto bikes and snowbikes. For snowbikes, we have snow specific vinyls available, ask.

The 2017-2019 seat (Part # 25007040000) has a narrow seat cover width which only allows a 9" wide seat if wanting to use your stock cover. We recommend more width for riders who sit down the majority of the time, which will require a new cover of your choice ($39.99). The factory cover has an aggressive grip. Our custom covers can have your desired grip.

Featured Husqvarna seat photos can be enlarged below. Click side of large image to navigate. More information and photos can be found on the other Husqvarna, Fisher Seats, and FAQ pages. Where you might find ideas for seat covers. We currently don't offer any luggage for Husky's, soon hopefully. Want a brand new 9-10" wide complete seat for the FE501, FS450, FE350, FC450, FX450, TX300, and so on? Click 'Add to Cart' below and/or email us an order form.

Steps to order a seat

Browse forums to make sure we're the right build for you. (hint: "we are")
Fill out an order form below. Email us with any questions.
Ship us your seat or purchase a complete.
Patience. 2 weeks of it, plus shipping time.

Some notes in reference to #1 above. Put more faith in fellow riders who have ridden more than 1 seat. That goes for all products. Regarding #3, include the form with shipped seat or email it to us. Complete seats do not have to be purchased below. That can also be done via email or over the phone. For what is shown on this page is not the full extent of what we can do with a custom seat.

Order Form.doc

Order Form.pdf

Featured Husqvarna seats

Priced as complete seats. Modify your seat for $100 less. Price varies with cover choice and width. Built up to width shown or less if desired. Fill out an order form with purchase. 2 week turn-around.